GI Service Center » Zone Offroad
Zone Offroad Categories
Items 1-3 of 3
Items 1-3 of 3
Zone Offroad Products
Items 1-60 of 101
- Page 1 of 2
- Next
Description: Important Notes!
Torsion bar unloading/loading tool required.
Frame bracket modifications required for installation.
Stock 17-18" wheels cannot be reinstalled, stock 20" wheels can be...More Details »
Item #: ZONC43F
Condition:
New
Price: $1,967.93
Description: Featured Technology & Benefits
One piece 1/4" steel crossmembers
CNC machined ductile iron steering knuckles
Differential skid plate with compression struts for offroad protection
Rear...More Details »
Item #: ZONC4
Condition:
New
Price: $1,362.60
Description: Fits factory cast steel, aluminum, and stamped steel control arm equipped models. Will work on Denali Models.
Item #: ZONC1221
Condition:
New
Price: $79.95
Description: Zone Offroad Products Chevy/GMC 2" Flat Lift Blocks (18mm pin). Highest quality fabricated and CNC machined lift blocks insure proper pin placement. Lift blocks are sold in pairs.
Item #: ZONU3024
Condition:
New
Price: $69.99
Description: High quality CNC machined lift blocks are sold in pairs.
Item #: ZONU3020
Condition:
New
Price: $29.99
Description: Zone Offroad Products CNC machined blocks are sold in pairs.
Item #: ZONU3030
Condition:
New
Price: $34.99
Description: Zone Offroad Products 4" Tapered (2.3 degrees) lift blocks with 9/16" pin. Powder coated and sold in pairs.
Item #: ZONU3040
Condition:
New
Price: $39.99
Description: Zone Offroad Products 5" tapered (6 degrees) lift block with 9/16" pin.
Item #: ZONU3050
Condition:
New
Price: $49.99
Description: Zone Offroad Products flat lift blocks with 9/16" pin.
Item #: ZONU3054
Condition:
New
Price: $49.99
Description: These blocks have the pin offset a 1/2" to re-center the axle within the wheel well on newer application where the rear leaf spring is mounted on an angle.
Item #: ZONU3053
Condition:
New
Price: $59.99
Description: Will NOT fit 2007 Classic models. Will NOT fit Denali models The optional rear bumper relocation system is for appearance only and cannot be used for towing.
Item #: ZONC9150
Condition:
New
Price: $149.95
Description: For automatic transmission models only Works with 2/4wd, all cab configurations Trimming of front bumper plastic valance or frame required for front bumper relocation Bumper hitch not for towing...More Details »
Item #: ZONC9155
Condition:
New
Price: $239.95
Description: No strut disassembly required 265/65R17 Tire on factory 17x8 wheel w/5.75" backspacing - this includes any equivalent spec'd larger diameter (18", 20", etc) wheel/tire combo. Will work on diesel...More Details »
Item #: ZONC1121
Condition:
New
Price: $49.95
Description: Will NOT fit 2007 - 2013 models. Will NOT fit Denali models
Item #: ZONC9151
Condition:
New
Price: $179.95
Description: Will not fit diesel engine models (due to intercooler)
Item #: ZONC9157
Condition:
New
Price: $165.95
Description: Will not fit Denali or MagneRide Models. The rear bumper is for appearance only. Cannot be used for towing.
Item #: ZONC9158
Condition:
New
Price: $189.95
Description: Will not fit 2007 classic models. Will not fit vehicles equipped with Auto-Ride. Will not fit MagneRide magnetic ride control equipped models
Item #: ZONC1200
Condition:
New
Price: $69.95
Description: Torsion bar unloading tool required. 35 x 12.50 tires on stock wheels will require trimming. If after market wheels with less backspacing are used then 33" tires are recommended. Shock extensions...More Details »
Item #: ZONC1204
Condition:
New
Price: $99.95
Description: Torsion bar unloading tool is required 35x12.50 tires require minor trimming when used with factory backspaced wheels. If using wheels with less backspace than factory, 33" tires are recommended....More Details »
Item #: ZONC1244/C1245
Condition:
New
Price: $179.95
Description: This system is for the new body style '07 models. It will not fit '07 Classic models. Will not fit vehicles equipped with Auto-Ride. Will not fit MagneRide magnetic ride control equipped models
Item #: ZONC1210
Condition:
New
Price: $129.95
Price: $149.95
Description: No strut disassembly required Fits Gas models only
Item #: ZONC1257
Condition:
New
Price: $205.95
Description: *Kit images show upgraded Nitro (black) shocks* Frame bracket mount modification required Torsion bar unloading/loading tool required Will not fit dually models To determine which kit # is...More Details »
Item #: ZONC31/C32
Condition:
New
Price: $795.95
Description: Will not fit regular cab, long box configuration. Will not fit Denali models. Will not fit 2007 Classic models. The rear bumper is for appearance only. Cannot be used for towing. Manual transfer...More Details »
Item #: ZONC9350
Condition:
New
Price: $374.95
Description: Will not fit 2007 Classic models. Will not fit Denali models. The optional rear bumper relocation system is for appearance only and cannot be used for towing.
Item #: ZONC1350
Condition:
New
Price: $199.95
Description: The optional rear bumper relocation system is for appearance only. The rear bumper cannot be used for towing after installation of the rear bumper relocation system. Factory or aftermarket...More Details »
Item #: ZONC1352
Condition:
New
Price: $249.95
Description: For automatic transmission models only Works with all cab configurations Trimming of front bumper plastic valance or frame required for front bumper relocation Bumper hitch not for towing after...More Details »
Item #: ZONC1355
Condition:
New
Price: $349.95
Description: *Kit images show upgraded Nitro (black) shocks* Certain tire/wheel packages can fit with the addition of the provided weld-on steering stops. These are necessary for deeper backspaced wheels to...More Details »
Item #: ZONC30
Condition:
New
Price: $619.95
Description: *Kit images show upgraded Nitro (black) shocks* Certain tire/wheel packages can fit with the addition of the provided weld-on steering stops. These are necessary for deeper backspaced wheels to...More Details »
Item #: ZONC29
Condition:
New
Price: $749.95
Description: Will NOT fit models equipped with stamped steel control arms.
Item #: ZONC1351
Condition:
New
Price: $229.95
Description: *IMPORTANT*: GM is producing several knuckle/control arm configurations in 2014-2017 models trucks. Cast Steel control arm equipped models will require the "Cast Steel Control Arm" kit (#C27)....More Details »
Item #: ZONC27/C28
Condition:
New
Price: $1,195.95
Description: *IMPORTANT*: GM is producing several knuckle/control arm configurations in 2014-2017 models trucks. Cast Steel control arm equipped models will require the "Cast Steel Control Arm" kit (#C35)....More Details »
Item #: ZONC35/C36
Condition:
New
Price: $899.95
Description: All wheel drive models require front driveline modification. Will not fit 2007 Classic models. Strut compressor required for installation. Frame bracket modification and minor welding required. To...More Details »
Item #: ZONC8
Condition:
New
Price: $1,295.95
Description: Will not fit 2007 Classic models. Strut compressor required for installation. To reduce trimming required 20" wheels with 5 1/2 to 5 3/4" backspacing recommended. Add-A-Leaf C6159 recommended a...More Details »
Item #: ZONC9
Condition:
New
Price: $999.95
Description: *Kit comes standard with NO SHOCKS* 2015-16 Models Only: 20" wheels can not be reinstalled due to GM changing the wheel thickness. The ID of the 20" wheels are smaller on 15-18 models. Torsion bar...More Details »
Item #: ZONC12N/C13N
Condition:
New
Price: $1,629.70
Sale: $1,261.70
Save: 23%
Save: $368.00
Description: *Kit images show upgraded Nitro (black) shocks* Inner fender trimming may be required. Minor welding required for steering stops when combined with certain tire/wheel combinations - see...More Details »
Item #: ZONC39
Condition:
New
Price: $1,299.95
Description: 1. All wheel drive models require front driveline modification. 2. Will not fit 2007 Classic models. 3. Strut compressor required for installation. 4. Frame bracket modification and minor welding...More Details »
Item #: ZONC1
Condition:
New
Price: $1,295.95
Description: Will not fit 2007 Classic models Strut compressor required for installation To reduce trimming required 20" wheels with 5-1/2 to 5-3/4" backspacing recommended Add-a-leaf option recommend for crew...More Details »
Item #: ZONC2
Condition:
New
Price: $949.90
Description: *IMPORTANT*: GM is producing several knuckle/control arm configurations in 2014-2017 models trucks. Cast Steel control arm equipped models will require the "Cast Steel Control Arm" kit (#C25)....More Details »
Item #: ZONC25/C26
Condition:
New
Price: $1,195.95
Description: *IMPORTANT*: GM is producing several knuckle/control arm configurations in 2014-2017 models trucks. Cast Steel control arm equipped models will require the "Cast Steel Control Arm" kit (#C33)....More Details »
Item #: ZONC33/C34
Condition:
New
Price: $899.95
Description: *Kit images show upgraded Nitro (black) shocks* All wheel drive models require front driveline modification Will not fit 2007 Classic models Minor frame bracket modification required To reduce...More Details »
Item #: ZONC40
Condition:
New
Price: $999.95
Description: Includes a pair (2) of upper control arms Does not work on vehicles equipped with Aluminum Lower Control Arms.
Item #: ZONC2310
Condition:
New
Price: $499.95
Description: Includes a pair (2) of upper control arms Wheel Size & Backspacing Recommendations for proper tire clearance at ball joint: 20x9 w/6" Backspaced Wheels 18x9 w/6" Backspaced Wheels 17x9 w/5"-5.5" Backspaced Wheels
Item #: ZONC2312
Condition:
New
Price: $560.95
Description: The rear bumper relocation system is for appearance only and cannot be used for towing. It will not affect towing with a standard receiver. Will not fit Mega Cab models Will work on 3.0L diesel equipped models
Item #: ZOND9150
Condition:
New
Price: $139.95
Description: The rear bumper relocation system is for appearance only and cannot be used for towing. It will not affect towing with a standard receiver. Will not fit Mega-Cab models.
Item #: ZOND9151
Condition:
New
Price: $165.95
Description: Diesel Models Only Some long bed configurations may require additional mounting hardware MegaCab Models will require (2) additional 12x140mm bolts and (2) Body Lift Pucks not included in the kit....More Details »
Item #: ZOND9152
Condition:
New
Price: $319.95
Description: Designed for models equipped with the radius arm suspension. Will not fit 2013 2500 (3/4 ton) models with the 4-link suspension design. 2500 and 3500 models do not use the same rear shocks - Be...More Details »
Item #: ZOND1201
Condition:
New
Price: $99.95
Description: This system fits all cab configurations This body lift works with vehicles equipped with automatic transmission only! This system works with V8 equipped vehicles only! Will not fit Mega-Cab models.
Item #: ZOND9345
Condition:
New
Price: $363.95
Description: Will work with 3.0L V6 Diesel models Rear bumper relocation is for appearance only and cannot be used for towing. Standard receiver hitch function is not affected Not to be used with any other form of leveling/lifting suspension systems
Item #: ZOND59
Condition:
New
Price: $659.90
Description: Strut compressor required for installation Minor frame bracket trimming necessary for differential clearance Frame horn modification necessary for installation of new front bumper brackets Rear...More Details »
Item #: ZOND60
Condition:
New
Price: $735.94
Description: Strut compressor required for installation Minor frame bracket trimming necessary for differential clearance Frame horn modification necessary for installation of new front bumper brackets Rear...More Details »
Item #: ZOND61
Condition:
New
Price: $761.94
Description: *Kit images show upgraded Nitro (black) shocks* Although very rare, front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case...More Details »
Item #: ZOND63
Condition:
New
Price: $1,159.95
Description: *Kit images show upgraded Nitro (black) shocks* Although very rare, front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case...More Details »
Item #: ZOND65
Condition:
New
Price: $999.95
Description: Not recommended for AWD models. Will not fit adjustable air suspension equipped models TRX models require removal of the lower skid plate but it is replaced in our lift system.
Item #: ZOND42/D43
Condition:
New
Price: $1,409.95
Description: Not recommended for AWD models. TRX models require removal of the lower skid plate but it is replaces in our lift system. These trucks vary 1" to 3" tail high from the factory. Measure your truck and order the appropriate rear lift height.
Item #: ZOND1/D23
Condition:
New
Price: $1,599.95
Description: Not recommended for AWD models. TRX models require removal of the lower skid plate but it is replaced in our lift system.
Item #: ZOND20/D22
Condition:
New
Price: $1,409.95
Description: Will not fit Mega-Cab models. Not recommended for AWD models TRX models require removal of the lower skid plate but it is replaced in our lift system.
Item #: ZOND3
Condition:
New
Price: $1,249.95
Description: Although very rare, front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Optional t-case indexing ring kit...More Details »
Item #: ZOND62
Condition:
New
Price: $975.95
Items 1-60 of 101
- Page 1 of 2
- Next