GI Service Center - Product Search
Browse Products
Description: Not recommended for AWD models. These trucks are typically between 1" and 3" tail high. Please measure your truck and order the appropriate rear lift height. TRX models will achieve aproximately 1"...More Details »
Item #: ZOND2/D15
Condition:
New
Price: $1,699.95
Description: 2-piece rear driveshaft requires carrier bearing drop kit D5505 Will not fit dually applications Rear axle diameter will be 3.5" or 4", measure before ordering Minor trimming may be required with...More Details »
Item #: ZOND26/D27/D28/D29
Condition:
New
Price: $1,105.95
Description: Works on 2013 2500 with 4 link front suspension only. Will not fit 1 Ton Trucks. 2-piece rear driveshaft requires carrier bearing drop kit D5505 Will not fit dually applications Rear axle diameter...More Details »
Item #: ZOND37/D38/D39
Condition:
New
Price: $1,105.95
Description: Will not fit Mega-Cab models. Not recommended for AWD models TRX models require removal of the lower skid plate but it is replaced in our lift system.
Item #: ZOND4
Condition:
New
Price: $1,295.95
Description: Not recommended for AWD models. Will not fit adjustable air suspension equipped models These trucks are typically between 1" and 3" tail high from the factory. Please measure your trucks factory...More Details »
Item #: ZOND40/D41
Condition:
New
Price: $1,519.95
Description: *Kit images show upgraded Nitro (black) shocks* Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Models...More Details »
Item #: ZOND57
Condition:
New
Price: $1,095.95
Description: *Kit images show upgraded Nitro (black) shocks* Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Models...More Details »
Item #: ZOND58
Condition:
New
Price: $1,345.99
Description: Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Models with a 6 bolt transfer case use part # D5623....More Details »
Item #: ZOND52
Condition:
New
Price: $899.95
Description: *Kit images show upgraded Nitro (black) shocks* Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Models...More Details »
Item #: ZOND53
Condition:
New
Price: $1,149.99
Description: 2-piece rear driveshaft requires carrier bearing drop kit D5505. Will not fit dually applications Rear axle diameter will be 3.5" or 4", measure before ordering Minor trimming may be required with...More Details »
Item #: ZOND24/D25
Condition:
New
Price: $1,329.95
Description: 2-piece rear driveshaft requires carrier bearing drop kit D5505 Will not fit dually applications Rear axle diameter will be 3.5" or 4", measure before ordering Minor trimming may be required with...More Details »
Item #: ZOND30/D31
Condition:
New
Price: $1,329.95
Description: Works on 2013 2500 with 4 link front suspension only. Will not fit 1 Ton 2013 Trucks. 2-piece rear driveshaft requires carrier bearing drop kit D5505 Will not fit dually applications Minor trimming...More Details »
Item #: ZOND36
Condition:
New
Price: $1,279.78
Description: Zone Offroad Products 4" tapered (2.3 degrees) highest quality CNC machined lift blocks insure proper pin placement. Lift blocks are sold in pairs. 2003-11 Dodge 3/4 ton & 1 ton models will...More Details »
Item #: ZONU3042
Condition:
New
Price: $39.99
Description: Zone Offroad Products 5" tapered (6 degrees) lift block with 3/4" pin. 2003-11 Dodge 3/4 ton & 1 ton models will require a pair of Zone part 01599 to covert factory 3 pin blocks to a single pin.
Item #: ZONU3052
Condition:
New
Price: $49.99
Description: The 2014-16 models have a different mount orientation on the passenger's side compared to the 09-13 models. This difference is detailed clearly in the instructions. Will not fit Raptor models
Item #: ZONF1203
Condition:
New
Price: $99.95
Description: *Kit images show upgraded Nitro (black) shocks* Will not work with rear factory top mounted overloads
Item #: ZONF45
Condition:
New
Price: $399.95
Description: Removal of the factory rear block is required. Net rear height gain will vary based on size of the factory block, but will result in a level stance. If equipped with a 2-piece rear drive shaft,...More Details »
Item #: ZONF25/F26
Condition:
New
Price: $1,053.48
Description: Removal of the factory rear block is required. Net rear height gain will vary based on size of the factory block, but will result in a level stance. If equipped with a 2-piece rear drive shaft,...More Details »
Item #: ZONF16/F18
Condition:
New
Price: $799.95
Description: If equipped with a 2-piece rear driveshaft, an F5401 carrier bearing drop kit may be required 37x12.50 tires may require minor trimming Must determine if vehicle is equipped with standard (2-leaf...More Details »
Item #: ZONF48/F50
Condition:
New
Price: $954.87
Description: Removal of the factory rear block is required. Net rear height gain will vary based on size of the factory block, but will result in a level stance. If equipped with a 2-piece rear drive shaft,...More Details »
Item #: ZONF30/F31/F32/F33
Condition:
New
Price: $1,379.95
Price: $1,457.23
Description: AWD models will require front driveshaft modification Will not work with 17" wheels If using 18x9 wheels with 5.5" backspace, fit the wheels before mounting to check for proper tie rod clearance....More Details »
Item #: ZONF10
Condition:
New
Price: $1,549.95
Description: Complete kit includes 2 add-a-leafs,center pins, alignment clamps. Smooth riding long thin add-a-leafs.
Item #: ZONF6209
Condition:
New
Price: $166.36
Description: Complete kit includes 2 add-a-leafs,center pins, alignment clamps. Smooth riding long thin add-a-leafs. Complete easy to follow Instructions.
Item #: ZONF6218
Condition:
New
Price: $99.44
cp3 conversion
Description:
2011-2016 LML CP3 Conversion Kit
Item #: FPE-LML-CP3-WP
Condition:
New
Price: $1,999.00